57 lines
4.9 KiB
Markdown
57 lines
4.9 KiB
Markdown
# Bootstrap Alpine Linux on a headless system
|
|
|
|
[Alpine Linux documentation](https://docs.alpinelinux.org/user-handbook/0.1a/Installing/setup_alpine.html) assumes **initial setup** is carried-out on a system with a keyboard & display to interract with.\
|
|
However, in many cases one might want to deploy a headless system that is only available through a network connection (ethernet, wifi or as USB ethernet gadget).
|
|
|
|
This repo provides an **overlay file** to initially bootstrap[^1] a headless system (leveraging Alpine distro's `initramfs` feature): it starts a ssh server to log-into from another Computer, so that actual install on fresh system (or rescue on existing disk-based system) can then be performed remotely.\
|
|
An optional script may also be launched during that same initial bootstrap, to perform fully automated setup.
|
|
|
|
|
|
## Setup procedure:
|
|
Please follow [Alpine Linux Wiki](https://wiki.alpinelinux.org/wiki/Installation#Installation_Overview) to download & create installation media for the target platform.\
|
|
Tools provided here can be used on any plaform for any install modes (diskless, data disk, system disk).
|
|
|
|
Just add [**headless.apkovl.tar.gz**](https://is.gd/apkovl_master)[^2] overlay file *as-is* at the root of Alpine Linux boot media (or onto any custom side-media) and boot-up the system.\
|
|
With default DCHP-based network interface definitions (and [SSID/pass](#extra-configuration) file if using wifi), system can then be remotely accessed with: `ssh root@<IP>`\
|
|
(system IP address may be determined with any IP scanning tools such as `nmap`).
|
|
|
|
As with Alpine Linux initial bring-up, `root` account has no password initially (change that during target setup!).\
|
|
From there, actual system install can be performed as usual with `setup-alpine` for instance (check [wiki](https://wiki.alpinelinux.org/wiki/Alpine_setup_scripts#setup-alpine) for details).
|
|
|
|
## Extra configuration:
|
|
Extra files may be added next to `headless.apkovl.tar.gz` to customise boostrapping configuration (check sample files):
|
|
- `wpa_supplicant.conf`[^3] (*mandatory for wifi usecase*): define wifi SSID & password.
|
|
- `unattended.sh`[^3] (*optional*): provide a deployment script to automate setup & customizations during initial bootstrap.
|
|
- `interfaces`[^3] (*optional*): define network interfaces at will, if defaults DCHP-based are not suitable.
|
|
- `authorized_keys` (*optional*): provide client's public SSH key to secure `root` ssh login.
|
|
- `ssh_host_*_key*` (*optional*): provide server's custom ssh keys to be injected (may be stored), instead of using bundled ones[^2] (not stored). Providing an empty key file will trigger new keys generation (ssh server may take longer to start).
|
|
- `auto-updt` (*optional*): allow apkovl file automatic update with latest from master branch. If it contains *reboot* keyword all in one line, system will reboot after succesful update (unless ssh session is active or `unattended.sh` script is available).
|
|
|
|
Main execution steps are logged: `cat /var/log/messages | grep headless`.
|
|
|
|
## Goody:
|
|
Seamless USB-serial & USB-ethernet gadget mode (*e.g. PiZero*):
|
|
- Make sure dwc2/dwc3 driver is loaded accordingly, and device configuration is set to `peripheral` mode: this may be hardware (including cable) and/or software driven.\
|
|
(on supporting Pi devices, just add `dtoverlay=dwc2,dr_mode=peripheral` in `usercfg.txt` (or `config.txt`) to force by software)
|
|
- Plug USB cable into host Computer port before boot.\
|
|
Serial terminal can then be connected-to from host Computer (e.g. `cu -l ttyACM0` on Linux. xon/xoff flow control).\
|
|
Alternatively, with host Computer set-up to share networking with USB interface as 10.42.0.1 gateway, one can log into device from host with: `ssh root@10.42.0.2`.
|
|
|
|
[^1]: Initial boot fully preserves system's original state (config files & installed packages): a fresh system will therefore come-up as unconfigured.
|
|
|
|
[^2]: About bundled ssh keys: this overlay is meant to **quickly bootstrap** system in order to then proceed with proper install; therefore it purposely embeds [some ssh keys](https://github.com/macmpi/alpine-linux-headless-bootstrap/tree/main/overlay/tmp/.trash) so that bootstrapping is as fast as possible. Those temporary keys are moved in RAM /tmp: they will **not be stored/reused** once actual system install is performed (whether or not ssh server is installed in final setup).
|
|
|
|
[^3]: These files are linux text files: Windows/macOS users need to use text editors supporting linux text line-ending (such as [notepad++](https://notepad-plus-plus.org/), BBEdit or any similar).
|
|
|
|
|
|
## Want to tweak more ?
|
|
This repository may be forked/cloned/downloaded.\
|
|
Main script file is [`headless.start`](https://github.com/macmpi/alpine-linux-headless-bootstrap/tree/main/overlay/usr/local/bin/headless_bootstrap).\
|
|
Execute `./make.sh` to rebuild `headless.apkovl.tar.gz` after changes.\
|
|
(requires `busybox`; check `busybox` build options if not running from Alpine or Ubuntu)
|
|
|
|
|
|
## Credits
|
|
Thanks for the initial guides & scripts from @sodface and @davidmytton.
|
|
|